Applications
Sportswear Fabrics for Movement, Comfort & Performance
Sportswear fabric development starts with the garment activity, movement needs and finishing process. Woven, knit and mesh directions can be reviewed around the brief.
- Application-led development
- Real fabric references
- Project-specific verification
Buyer requirement overview
What should the fabric do?
Garment-specific fit
Define the garment zone, fit and body contact before choosing the material direction.
Weight & handfeel
Set the target lightness, drape and surface feel as development priorities rather than assumptions.
Movement & comfort
Map stretch, recovery, airflow or insulation needs to the panels that actually require them.
Durability & care
Clarify wear, laundering and surface expectations that may affect the approved construction.
Garment-zone map
Garment zone → recommended fabric direction
Different panels can need different constructions. Map the garment first, then evaluate each material direction against the same project brief.
Start with fit, movement, skin contact and the required balance of stretch, stability and comfort.
Review woven movement, handle, durability and finishing around the garment pattern.
Use openness, placement and skin contact to guide mesh or lining construction.
Curated sample references
Compare fabrics by role, not just by category
Each reference below has a defined role and a reason to compare it for this garment. Use the recorded specifications as a starting point, then confirm physical sample, colour, performance targets and commercial requirements for the project.
Stretch body reference
KNIT FABRIC
SJMSG0102
180 gsm · 93% Polyester / 7% Spandex
Why compare it: 180 gsm polyester/spandex knit reference for close-to-body or mobility-panel comparison.
Ventilation / lining reference
Open Hole Mesh
SJHS125063
150 gsm · 100% Polyester
Why compare it: Open-hole mesh reference for zones where openness, lining or airflow placement needs to be discussed.
Woven short / structured-panel reference
T800 Seersucker
SJQY140
130 gsm · 100% Polyester
Why compare it: 130 gsm polyester woven reference for loose-fit or more structured sportswear panels.
Real sample-card references
Fabric samples to discuss for Sportswear
Each reference below is selected individually from its sample-card data and visible fabric structure. Suggested uses are development directions, not proof that the material has been approved for the garment or performance target.
Fine-grid swim stretch reference
SJHSY0010
Muted rose stretch surface with a fine regular grid. The card identifies it as swimming fabric; exact recovery, chlorine resistance and other swim performance are not established here.
- Composition
- 80%N / 20%SP
- Description
- swimming fabric
- Weight
- 180 ±5% GSM
- Width
- 160 CM ±5%
Swimwear development · Sportswear stretch panel discussion
Source: supplier sample card. Not a verified catalogue SKU.
Perforated swim stretch reference
SJHSY0013
Dark grey surface with a regular field of fine openings. The image supports discussion of visible structure only; airflow rate and stretch recovery are not established by the photograph.
- Composition
- 83%N / 17%SP
- Description
- swimming fabric
- Weight
- 180 ±5% GSM
- Width
- 160 CM ±5%
Swimwear development · Activewear open-surface panel discussion
Source: supplier sample card. Not a verified catalogue SKU.
Gradient-hole swim stretch reference
SJHSY0021
Dark stretch fabric with a subtle gradient of perforation-like marks across the surface. The pattern is visible; measured ventilation and recovery performance require separate verification.
- Composition
- 88%N / 12%SP
- Description
- swimming fabric
- Weight
- 160 ±5% GSM
- Width
- 160 CM ±5%
Swimwear development · Sportswear surface/panel development
Source: supplier sample card. Not a verified catalogue SKU.
Fine-grid stretch reference
SJXFL098
Blue-grey fine-grid surface with a regular small-scale texture. The card records a stretch composition, but does not identify the exact construction or performance.
- Composition
- 86%P / 14%SP
- Weight
- 180 GSM ±5%
- Width
- 160 CM ±5%
- Remark
- 3002精致格
Sportswear textured stretch development · Cycling panel discussion
Source: supplier sample card. Not a verified catalogue SKU.
Development workflow for buyers
A clear path from brief to bulk follow-up
Brief review
Define the garment, target use and key priorities.
Material consultation
Review suitable fabric directions and reference samples.
Sample development
Refine construction, handfeel, colour and finishing questions.
Testing feedback
Evaluate agreed project-specific checks and revise where needed.
Bulk follow-up
Carry the approved direction into production follow-up.
Common questions
Questions buyers ask before sampling
Which fabric direction should we start with?
Start with the garment zone, fit, target handfeel and the performance priorities that matter most. A reference swatch or existing garment is useful but not required.
Can you develop from an existing reference?
Yes. Use the reference to define visible construction and handfeel, then confirm any technical requirement separately during development.
Can different garment zones use different fabrics?
Yes. Mapping shell, lining, stretch and ventilation zones before sampling often produces a clearer development brief.
What information helps the first review?
Garment type, target construction, known weight or width, performance priorities, colours, estimated quantity and timing are useful starting inputs.
Are example ranges on this page final specifications?
No. Example ranges are planning guidance only. Final composition, weight, finish and performance are confirmed for the selected development.
Technical help
Questions worth clarifying before sampling
Discuss your application with Sinjo
Start with the garment, target construction and performance priorities. The application field is carried into the inquiry form so the first review keeps this context.